Home  >  Search Result > Products

 

 

204GAF039 - GREEN ACME Inlet Tank Safety Fitting

  204GAF039

204GAF039 - GREEN ACME, Type One Inlet tank safety fitting, is a wrench-less, user friendly, right hand tank connector with excess flow prevention and a thermally sensitive sleeve bushing.


200,000 btu/hr maximum output. 1 5/16" ACME x 1/4" M NPT. Designed for low pressure propane regulators (our COM5 series regulators, and other low pressure hoses and fittings). Perfect for use with most gas grills and other low pressure devices. Installation requires use of an 11/16" socket, preferably 6 point. Order a Green ACME and we will install it on the low pressure regulator you order. No installation charges. Pictured below is a Green ACME inlet installed on a COM5 regulator assembly.


►    Green Acme Inlet Tank Fitting Video


Why should anyone order a Green Acme tank fitting for their regulator?


A Green Acme Type I tank fitting will screw into practically any propane tank except some of the very large 100# propane tanks. You tighten it up clockwise using your hand. It does not require the use of a wrench! Most folks find that very handy. It has safety features of excess flow prevention, which means if there is a major leak, the internal spring inside the Acme fitting will shut off the flow of the gas. It also has a thermal sensitive sleeve bushing. When this sleeve bushing is exposed to temperatures over 240 ºF, it will melt and allow a brass nipple inside the nut to shift about 1/4". The forward movement of the nipple will close a small piston inside the cylinder valve and all propane gas will stop flowing. The Green Acme protects you and your family.

Wt. 1#. Free shipping within the 48 contiguous U.S. States.
 

  • Green Acme Safety Tank Fitting on Low Pressure Regulator

    Green Acme Safety Tank Fitting on
    Low Pressure Regulator

  •    Green Acme Tank Fitting

    Green Acme Back Side

  • Green Acme Tank Fitting

    Green Acme Front Side

$12.00