Home  >  Search Result >

 

Home  >  Search Result > Products

 

 

HP12 - Single Burner Hot Plate Cooker with 12" diameter 120,000 btu/hr Burner, Low Pressure or Natural Gas

  HP12

HP12 - Single Burner Hot Plate Cooker with 12" diameter 120,000 btu/hr Burner, choose Low Pressure or Natural Gas.


This is a new high heat burner of our own design. It is the highest btu/hr cast iron burner for natural gas use on the market today. The only way to get more btu/hr from a natural gas burner is to use a jet burner. Designed for the cooks who really want to use Natural Gas and have been frustrated by the current btu/hr heat limits of the burners available on the market.

We recommend the use of a COM5 low pressure propane regulator. Contact us for natural gas hoses, which we stock in many lengths. This new casting also has the ability to accept a T-PILOT Assembly.   Many accessory options are found at the bottom of this page.


Wt. 38#. Free shipping within the 48 contiguous U.S. States.


  • Single burner 120,000 btu/hr Using Natural Gas or Low Pressure Propane

An Amazing 120,000 btu/hr Using Natural Gas or Low Pressure Propane

 

$700.00

 

 

HP12-COM  - Single Burner Hot Plate Cooker with 12" diameter 120,000 btu/hr Burner COMBO, Low Pressure or Natural Gas

  HP12-COM

HP12-COM Single Burner Hot Plate Cooker with 12" diameter 120,000 btu/hr Burner COMBO: includes CVO125 needle control valve, Wind Guard WG1 and a low pressure COM5 PRESET regulator combo assembly or a natural gas hose. Your choice of Low Pressure or Natural Gas.


This Hot Plate Cooker uses our new design HP12-2 cast burner. It was designed to give 20% more btu/hr than any other existing cast iron burner using natural gas or low pressure propane. It delivers. Every Hot Plate Cooker we sell has burners with needle valve controls. The HP12 series single burner Hot Plates Cookers give you incredible heat up to 120,000 btu/hr., but also allow you to attenuate the heat to very low levels for simmering things in a sauce pan. It does it all.

♦  HP12L-COM series includes COM5 Low Pressure Preset Reg with 5' hose
♦  HP12N-COM series includes a 5' natural gas hose

Optional WING side table extensions and Small GRIDDLE  among other options are found at the bottom of this page. This new casting also has the ability to accept a T-PILOT Assembly.


Wt. 48#. Free shipping within the 48 contiguous U.S. States.


HP12L-COM Cooker includes 120,000 btu/hr Low Pressure Burner, (2) WING
Side Table Extensions,
WG1 Wind Guard, COM5 Low Pressure Regulator


 

$900.00

 

 

CS12 - Single Burner Cooker Stand with 12" Diameter 120,000 btu/hr Burner, Low Pressure, Natural Gas

  CS12

CS12 - Single Burner Cooker Stand with 12" Diameter 120,000 btu/hr Burner, choose Low Pressure or Natural Gas. With (4) Leg Extensions.


This cast burner was designed by Tejas Smokers and is unique. It can develop more btu/hr than any other cast burner using natural gas or low pressure propane. To develop more heat with natural gas or low pressure propane, you have to use a jet burner. It also has another unique feature in that it was designed to hold a pilot light and work with a thermostat controller. If you have interest in something like this give us a call. We have them in stock. Only available at Tejas Smokers®.


Uses 7CS12 cover shown below.


Wt. 47#. Free shipping within the 48 contiguous U.S. States.


  • Single Burner Cooker Stand with 120,000 Btu/hr Low pressure Burner

CS12-N Cooker Stand for Natural Gas Which Outputs
Up To 120,000 btu/hr! Shown Without the Included Legs
Also Available for Use with Low Pressure Propane


The CS12 Cooker Stand can be custom ordered with two or three burners and with end wire spring handles for easier carrying. Call for information.


 

$700.00

 

 

CS12-COM - Single Burner Cooker Stand with 12" Diameter 120,000 btu/hr Burner, Low Pressure, Natural Gas

  CS12-COM

CS12-COM - Single Burner Cooker Stand with 12" Diameter 120,000 btu/hr Burner COMBO, choose Low Pressure or Natural Gas. Includes (2) WING side extensions,(1) WG1 wind guard, a COM5 low pressure regulator, or a natural gas hose


This is a completely new high-heat burner of our own design. It is the highest btu/hr cast iron burner for natural gas use on the market today. The only way to get more btu/hr using natural gas is to use a jet burner. This cast design also has the ability to accept a pilot light and/or a thermostat control unit. If interested give us a call. We have them in stock.


Uses 7CS12 cover shown next below.


Wt. 69#. Free shipping within the 48 contiguous U.S. States.


  • 120,000 Btu/hr Single Burner Cooker Stand with Wind Guard, (2) wings and Regulator

CS12-LCOM Cooker Stand Shown Disassembled. Above
Burner Is Set Up For Using Low Pressure Propane


 

$1000.00

 

 

INSECT-L2 - Large  Insect Guard, Pre Cut Screen, 3 1/2" Diameter for Cast Iron Burner

  INSECT-L2

INSECT-L2 - Large Insect Guard, Pre Cut Screen, 3 1/2" Diameter Large Screen for Cast Iron Burner

  • The screen helps prevent insects from nesting inside cast iron burner, in the air inlet. It is standard on the following burners that we stock:

LPCAST8-2, LPCAST10, LPCAST10-2, LPCAST12-2

  • If you are purchasing a burner from us then there is no need to purchase a Insect Guard since is already included in the burner.
  • Diameter of Insect Guard is approxiately 3 1/2".

Wt. 1 oz. Free shipping within the 48 contiguous U.S. States.

$5.00