Home  >  Search Result >

Customer Reviews / Testimonials
Venturi Air Gas Mixers

Home  >  Search Result > Products

 

 

A125AM - 1 1/4" Cast Aluminum Venturi Gas and Air Mixer

  A125AM

BACK IN STOCK

A125AM - 1 1/4" Cast Aluminum MONSTER Venturi Gas and Air Mixer.


- Aluminum Casting Made in Houston, Texas. Made-in-U.S.A.


- It has a 1 1/4" Female Normal Pipe Thread Outlet.

-  Light Weight, No Paint Needed and No Rust.

- To be used with High Pressure / Low Pressure Propane or
   Natural Gas.

- The flat top surface is 4" in Diameter by 2 1/2" in height.
- The height of the venturi with an orifice is approximately 4".

- Includes an Aluminum Air Shutter, Insect Screen Guard and a 
  90 3/8" Flare Orifice, with #61 Orifice for High Pressure Propane.

- Alternatively, a 180 3/8" Flare Orifice fitting is also available.
- Drilled to custom orifice size depending on your specified fuel and 
  length of pipe burner or specified burner at No Extra Charge.

(For alternative orifice or custom drilled orifice please let us know the
  information in comment box section when added to shopping cart).


   For High Pressure use we recommend the COM3 regulator/hose.

   For Low Pressure use we recommend the COM5 regulator/hose.

   The Optional CVO Needle Control Valve with Orifice.

   Also available with a T-Pilot Assembly.


Weight 1#. Free Shipping within the 48 contiguous U.S. States.


          Cast Aluminum Venturi, Female NPT          Cast Aluminum Venturi, Female NPT
                             1 1/4" Female NPT Outlet Threads


The photos below show the different Options which can be choosen from the drop-down menu above the price.

OPTIONS:

          Cast Aluminum Venturi, Air and Gas Mixer         Cast Aluminum Venturi, Air and Gas Mixer
          A125AM with 90 Degree Orifice, $ 149.95


          Cast Aluminum Venturi, Air and Gas Mixer with Control Valve Orifice    Cast Aluminum Venturi, Air and Gas Mixer with Control Valve Orifice     Cast Aluminum Venturi, Air and Gas Mixer with Control Valve Orifice
          A125AM with CVO Neddle Control Valve Orifice, $ 179.95


          Cast Aluminum Venturi, Air and Gas Mixer with Pilot Assembly     Cast Aluminum Venturi, Air and Gas Mixer with Pilot Assembly
          A125AM with T-PILOT Assembly, $ 229.95

 

$149.95

 

 

CVO - Control Valve  Orifice Fitting  For Burner, MNPT x 3/8" MGF

  CVO

CVO - Control Valve Orifice for 1/8", 1/4", or 3/8" NPT Burner Gas Inlet.

Select a CVO250 for a Pipe Burner. For a Cast Iron Burner the correct CVO can be selected from the drop down menu of the burner.
 

Why would I need a gas burner Control Valve Orifice?

The CVO series needle control valve orifice allows one to adjust the height of the burner flames directly at the venturi rather than further back at the propane tank regulator or the natural gas source. This Control Valve Orifice fitting will work on practically any gas burner if the orifice is drilled to the proper size and you know the size of the gas inlet thread (1/8" or 1/4").  Indicate your fuel preference of either natural gas, low pressure propane, or high pressure propane in the Comments section in the Shopping Cart. The default orifice size is #61 for High Pressure propane. However, we will drill it to the proper orifice size for your particular fuel. No extra charge.

 

►  Control Valve Orifice Video

Free shipping to the 48 contiguous U.S. States.


  • Control Valve Orifice (1/8 M NPT X 3/8 M GF)

    CVO125
    (1/8" M NPT X 3/8" M GF)

  • Control Valve Orifice (1/4 M NPT X 3/8 M GF)

    CVO250
    (1/4" M NPT X 3/8" M GF)

CVO needle valve control on a straight pipe burner

 

$39.95

 

 

PBM125 - Pipe Burner - support LEGS are an option

  PBM125

PBM125 - Straight Pipe Burner 1 1/4" ID - 32", 44", 56", or 68" lengths.

  • We stock 32", 44", 56", and 68" pipe burner assemblies, also called stick burners or tube burners, (as measured from one end of the pipe to the opposite end of the pipe's threads.)
  • The pipe burners are 1.25"ID and 1.5"OD with a standard schedule 40 pipe wall thickness. These assemblies include a welded end cap at one end and a venturi at the other end.
  • For supporting the assembly we recommend a cradle out of a well supported length of angle iron. A cradle support will permit easy removal of the burner unit for cleaning, when necessary.
  • Our pipe burners have been engineered and tested to give a even, high heat blue flame across the length of the pipe and they easily light.
  • The first 8" of the pipe is used as the "throat" of the burner and does not have any holes for flames. This space is required for the air and gas to mix efficiently in order to have a nice blue flame. Don't waste propane using a pipe burner that burns an inefficient yellow flame.

●   PBM125-32" has 24" of flame         8#                  10#
●   PBM125-44" has 36" of flame       10#                  12#
●   PBM125-56" has 48" of flame       12#                  15#
●   PBM125-68" has 60" of flame       15#                  18#

If you would like  TejasSmokers.com  to weld permanent 1/2" diameter round support legs along the length of your pipe burner then order the unit with "LEGS" at the end of the part number, as shown in the drop down box at right.

We can custom fabricate stainless steel pipe burners in any length on our milling machine.  Call for a quote.

 Free shipping within the 48 contiguous U.S. States.

 

  • 68" Pipe Burner with 1 1/4" FNPT Venturi and Optional Control Valve Orifice (Needle Valve)

  • 32in Pipe Burner with Support Legs

    32" Pipe Burner with Optional Support Legs

  • 32in Pipe Burner with Optional Support Legs and Pilot Assembly
  • 32in Pipe Burner with Optional Support Legs and Pilot Assembly

T-PILOT Assembly for the pipe burner is available as an Option at additional charge

 

$299.95

 

 

1504 - Log Lighter and Gas Heat Assist Pipe Burner

  1504

1504 - Log Lighter and Gas Heat Assist Pipe Burner. Includes Brass Adapter


►   The LPG gas log lighter pipe will save you a half hour every time you start your logs. Simply turn on the gas from your propane tank and light the log lighter, wait a few minutes, and the logs are in flames. This procedure also eliminates the need for using charcoal and smelly charcoal lighter fluid. The natural gas version is available by request at the same price.

►   This unit also works well as a gas assist for maintaining a constant temperature in a pit when you don't want to use wood logs or charcoal. A relatively small flame will maintain the pit at 225 degrees (or higher).

►   The log lighter pipe itself, not including the cast iron venturi (gas/air mixing chamber) is 16 1/4" in length. Measuring from the end of the venturi, there is 4 1/4" of pipe before the first hole. Then the series of holes continue for 10 1/2". Measuring from the final hole there is 1 1/2" of  pipe to the end of the assembly.

►   Pipe length is 16 1/4"

►   Venturi length (gas/air mixing chamber):  3 1/4"
►   Product length: 19 1/2"

►   To be used with a High pressure regulator


Wt. 1# 11 oz. Free shipping within the 48 contiguous U.S. States

$50.00

 

 

PBMG125 - Pipe Burner with Grease Shield - (support LEGS are an option)

  PBMG125

PBMG125 - Straight Pipe Burner 1 1/4" ID in 32", 44", 56", or 68" lengths with a permanently welded 3" high grease shield.

  • We stock 32", 44", 56", and 68" pipe burners assemblies.(As measured from one end of the pipe to the opposite end of the pipe's threads.)
  • The pipe burners are 1.25"ID and 1.5"OD with a standard schedule 40 pipe wall thickness. These assemblies include a welded end cap at one end and a venturi at the other end.
  • For supporting the assembly we recommend a cradle out of a well supported length of angle iron. A cradle support will permit easy removal of the burner unit for cleaning, when necessary.
  • Our pipe burners have been engineered and tested to give a even, high heat blue flames across the length of the pipe and they easily light.
  • The first 8" of the pipe is used as the "throat" of the burner and does not have any holes for flames. This space is required for the air and gas to mix efficiently in order to have a nice blue flame. Don't waste propane using a pipe burner that burns an inefficient yellow flame.

●   PBM125-32" has 24" of flame           12#                         14#
●   PBM125-44" has 36" of flame           16#                         18#
●   PBM125-56" has 48" of flame           20#                         22#
●   PBM125-68" has 60" of flame           24#                         26#

If you would like TejasSmokers.com to weld permanent 1/2" diameter round legs to support your pipe burner, then order the unit with "LEGS" at the end of the part number, as shown in the optional drop down box at right.
                          Free shipping within the 48 contiguous U.S. States.


                         32" Pipe Burner with Grease Shield and Optional Support Leg

                                              
                                      Pipe Burner with Optional T-PILOT Assembly

 

$349.95

 

 

PBM-MODIFY - Custom Length Pipe Burner Modification

  PBM-MODIFY

PBM-MODIFY - Custom Length Pipe Burner Modification.

There is a $50.00 charge for custom length modifications of pipe burners to shorten them from one of the stocked sizes.


If you need a 31" pipe burner, for example, you should purchase a 32" stocked unit (with or without a grease shield) and we will shorten the pipe and weld a 1/8" thick round steel plate on the end. Such reductions in length come from the flame length section of the pipe and not the smooth "throat" region near the venturi. Refer to photo at right to see how a custom length end would look.



$50.00

 

 

  A75AM - 3/4" Cast Aluminum Venturi Air Gas Mixer, with an air shutter, Insect Screen Guard, and the selected orifice fitting. 

  A75AM

BACK IN STOCK

A75AM  3/4" Cast Aluminum Venturi Air Gas Mixer, air shutter, with Insect Screen Guard, and a 90° 3/8" gas flare orifice fitting (or selected orifice type).

-    Aluminum Casting Made in Houston, Texas. Made-in-U.S.A.


-  It has a 3/4" Female Normal Pipe Thread Outlet.

-  Light Weight, No Paint Needed and No Rust.

- To be used with High Pressure / Low Pressure Propane or
   Natural Gas.

- The flat top surface is 3" in diameter by 1-3/4" in height.

- The height of the venturi with an orifice is approximately 2-3/4".


- Includes an Aluminum Air Shutter, Insect Screen Guard and a 
  90 3/8" Flare Orifice, with #61 Orifice for High Pressure Propane.

- Alternatively, a 180 3/8" Flare Orifice fitting is also available.
- Drilled to custom orifice size depending on your specified fuel and 
  length of pipe burner or specified burner at No Extra Charge.

(For alternative orifice or custom drilled orifice please let us know the
  information in comment box section when added to shopping cart).
 


Weight 7 oz. Free shipping within the 48 contiguous U.S. States.

3/4
3/4" Female NPT outlet threads.

The photos below show the different Options which can be choosen from the drop-down menu above the price.

OPTIONS:

A75AM - 3/4
A75AM with 90° Orifice, $99.95 


A75AM with CVO Valve Orifice, $139.95

       
A75AM with T-PILOT Assembly, $179.95  






 

$99.95

 

 

LPCAST6-2 - Low Pressure Propane or Natural Gas 2-Part Burner, 6" x 6" Sqaure Burner Head with Adjustable Lenght Neck

  LPCAST6-2

NEW BURNER /
NEW DESIGN


LPCAST6-2 - Low Pressure Propane or Natural Gas Two-Part Burner


Perfect for Smoker Pits and Smoke Houses.


- Made in Houston, Texas. Made-in-U.S.A.


- 40,000 BTU/hr Output

- 6" x 6" Burner Head

- Aluminum Casting Air and Gas Mixer Venturi



- Set Up for Low Pressure Propane Or Natural Gas

- Two-Part Burner, Pipe Nipple NOT Included


- NEW Design from our our LPCAST-2 Burner

( Similar to our old LPCAST-2 Burner but a better Upgrade)

- LPCAST-2 Video Reference


     
                                                      Top View of Burner Head 

      
Bottom View of Burner Head                                   Side View of Burner Head         

     
                                                     3/4" Female NPT Threads 


LPCAST6-2 Burner OPTIONS: 

       
LPCAST6-2 with 90 Degree Orifice, $ 259.95


      
LPCAST6-2 with CVO Needle Control Valve Orifice, $ 299.95


      
LPCAST6-2 with T-Pilot Assembly, $ 339.95

 

$259.95

 

 

LPCAST8-2 - Low Pressure Propane or Natural Gas 2-Part Cast Iron Burner, 8" Diameter w/Adj. Length Neck and Height

  LPCAST8-2

LPCAST8-2 - Low Pressure Propane or Natural Gas Two-Part Cast Iron Burner, 8" Diameter - Adjustable Length Neck and Height, a Home Brewer Burner Favorite

  • Produces up to 80,000 BTU/hr in an evenly-directed manner.
  • Designed for cooks who want more btu/hr from a low pressure cast.
  • A unique burner ideal for applications where the venturi is needed to be placed farther away from the burner. Minimum distance of 4". The ideal versatile burner for custom Brewstands.
  • Flame can be controlled down to a low simmer.
  • Best working distance is 2" from top of cast to bottom of pot.
  • The distance between the burner head and venturi is determined by the length of the 1 1/4" black pipe nipple used. Pipe nipple must be at least 4" long. Pipe nipple NOT included.
  • Burner head and venturi have 1 1/4" female normal pipe thread inlets.
  • Includes air shutter, Insect Screen Guard and a 90° 3/8" flare Orifice.A 180° 3/8" flare fitting is also available upon request.
  • The burner head has a bottom center bolt which is a 6mm in diameter
  • Burner head diameter is 8", height from base to top of burner is 6".

Weight 11# 10 oz. Free shipping within the 48 contiguous U.S. States.


  • 80,000 BTU/hr Low Pressure or Natural Gas Two-Part Cast Iron Burner - Adjustable Length Neck

    LPCAST8-2 with standard 90º brass orifice

  • 80,000 BTU/hr Low Pressure or Natural Gas Two-Part Cast Iron Burner - Adjustable Length Neck

    LPCAST8-2 with Optional CVO250

  • 80,000 BTU/hr Low Pressure or Natural Gas Two-Part Cast Iron Burner - Adjustable Length Neck
  • 80,000 BTU/hr Low Pressure or Natural Gas Two-Part Cast Iron Burner - Adjustable Length Neck

Bottom view of the LPCAST8-2

  • 80,000 BTU/hr Low Pressure or Natural Gas Two-Part Cast Iron Burner - Adjustable Length Neck
  • 80,000 BTU/hr Low Pressure or Natural Gas Two-Part Cast Iron Burner - Adjustable Length Neck

Novel design of LPCAST8-2 casting permits a pipe nipple of any length to enter from below


 

$199.95

 

 

LPCAST10-2 - Low Pressure Propane or Natural Gas, 2-Part Cast Iron Burner with Adjustable Length Neck

  LPCAST10-2

LPCAST10-2 - Low Pressure Propane or Natural Gas Two-Part Cast Iron Iron Burner with Adjustable Length Neck, a Versatile Brew Burner.

  • Produces up to 100,000 BTU/hr in an evenly-directed manner.
  • Flame can be controlled down to a low simmer.
  • This unique burner is ideal for applications where the venturi is needed to be placed farther away from the burner. Minimum distance of 4".
  • Distance between burner head and venturi is determined by the length of the 1 1/4" black pipe nipple used. Pipe nipple is NOT included.
  • Best working distance is 2" from top of cast to bottom of pot.
  • Burner head and venturi have 1 1/4" female normal pipe thread inlets.
  • Includes air shutter, Insect Screen Guard and a 90° 3/8" flare Orifice. A 180° 3/8" flare fitting is also available upon request.
  • It has four 8mm bolts to the sides of the burner, to mount the burner.
  • Burner head diameter is 10", height from base to top of burner is 5".

Weight 14# 8 oz. Free shipping within the 48 contiguous U.S. States.


  • 100,000 BTU/hr Low Pressure or Natural Gas Two-Part Cast Iron Burner - Adjustable Length Neck
  • 100,000 BTU/hr Low Pressure or Natural Gas Two-Part Cast Iron Burner - Adjustable Length Neck

LPCAST10-2 with Optional CVO Needle Valve Orifice

  • 100,000 BTU/hr Low Pressure or Natural Gas Two-Part Cast Iron Burner - Adjustable Length Neck

    Bottom view of the LPCAST10-2

  • 100,000 BTU/hr Low Pressure or Natural Gas Two-Part Cast Iron Burner - Adjustable Length Neck

    LPCAST10-2

  • LPCAST10-2 with Optional T-PILOT
  • T-PILOT Stainless Steel Burner Tip

LPCAST10-2 with Optional T-PILOT

 

$249.95