Home  >  Search Result >

 

Home  >  Search Result > Products

 

 

CVO - Control Valve  Orifice Fitting  For Burner, MNPT x 3/8" MGF

  CVO

CVO - Control Valve Orifice for 1/8", 1/4", or 3/8" NPT Burner Gas Inlet.

Select a CVO250 for a Pipe Burner. For a Cast Iron Burner the correct CVO can be selected from the drop down menu of the burner.
 

Why would I need a gas burner Control Valve Orifice?

The CVO series needle control valve orifice allows one to adjust the height of the burner flames directly at the venturi rather than further back at the propane tank regulator or the natural gas source. This Control Valve Orifice fitting will work on practically any gas burner if the orifice is drilled to the proper size and you know the size of the gas inlet thread (1/8" or 1/4").  Indicate your fuel preference of either natural gas, low pressure propane, or high pressure propane in the Comments section in the Shopping Cart. The default orifice size is #61 for High Pressure propane. However, we will drill it to the proper orifice size for your particular fuel. No extra charge.

 

►  Control Valve Orifice Video

Free shipping to the 48 contiguous U.S. States.


  •  Control Valve Orifice (1/8 M NPT X 3/8 M GF)

    CVO125
    (1/8" M NPT X 3/8" M GF)

  • Control Valve Orifice (1/4 M NPT X 3/8 M GF)

    CVO250
    (1/4" M NPT X 3/8" M GF)

CVO needle valve control on a straight pipe burner

 

$39.95

 

 

HPOCA4 - High Pressure Cast Iron Propane Burner with 4" Neck

  HPOCA4

HPOCA4 - High Pressure Cast Iron Propane Burner with a shorter 4" Neck

  • Produces up to 160,000 BTU/hr in an evenly-directed manner.
  • Includes air shutter, Insect Screen Guard, and a 90° 3/8" flare Orifice.Alternatively, a 180° 3/8" flare orifice fitting is also available.
  • Best working distance is 3" to 4" from top of cast to bottom of pot.
  • The center bolt is a 6mm in diameter or a 1/4".
  • From the center bolt to the air inlet at the edge of the burner is 5".
  • Best working distance is 3" to 4" from top of cast to bottom of pot.
  • From the center bolt to the end of the orifice is approximately 6".
  • Total length of the burner with an orifice is approximately 8".
  • Burner head diameter is 4", height from base to top of burner is 3".

Weight 3# 13 oz. Free shipping within the 48 contiguous U.S. States.


  • 160,000-BTU/hr-High-Pressure-Cast Iron-Burner-with-4-inch-Neck
  • 160,000-BTU/hr-High-Pressure-Cast-Iron-Burner-with-4-inch-Neck

HPOCA4 with Optional Control Valve Orifice Bottom side view of the HPOCA4

  • 160,000-BTU/hr-High-Pressure-Cast-Iron Burner-with-4-in-Neck
  • 160,000-BTU/hr-High-Pressure-Cast-Iron-Burner-with-4-inch-Neck

Bottom side view of the HPOCA4

  • High-Pressure-Propane-Burner-4-inch-throat-and Pilot-Light
  • High-Pressure-Cast-Iron-Burner-With-Pilot-Light-4-inch-neck

HPOCA4 with Optional T-PILOT for the burner

 

$39.95

 

 

PBM125 - Pipe Burner - support LEGS are an option

  PBM125

PBM125 - Straight Pipe Burner 1 1/4" ID - 32", 44", 56", or 68" lengths.

  • We stock 32", 44", 56", and 68" pipe burner assemblies, also called stick burners or tube burners, (as measured from one end of the pipe to the opposite end of the pipe's threads.)
  • The pipe burners are 1.25"ID and 1.5"OD with a standard schedule 40 pipe wall thickness. These assemblies include a welded end cap at one end and a venturi at the other end.
  • For supporting the assembly we recommend a cradle out of a well supported length of angle iron. A cradle support will permit easy removal of the burner unit for cleaning, when necessary.
  • Our pipe burners have been engineered and tested to give a even, high heat blue flame across the length of the pipe and they easily light.
  • The first 8" of the pipe is used as the "throat" of the burner and does not have any holes for flames. This space is required for the air and gas to mix efficiently in order to have a nice blue flame. Don't waste propane using a pipe burner that burns an inefficient yellow flame.

●   PBM125-32" has 24" of flame         8#                  10#
●   PBM125-44" has 36" of flame       10#                  12#
●   PBM125-56" has 48" of flame       12#                  15#
●   PBM125-68" has 60" of flame       15#                  18#

If you would like  TejasSmokers.com  to weld permanent 1/2" diameter round support legs along the length of your pipe burner then order the unit with "LEGS" at the end of the part number, as shown in the drop down box at right.


We can custom fabricate 
stainless steel pipe burners in any length on our milling machine.  Call for a quote.

 Free shipping within the 48 contiguous U.S. States.

 

  • 68" Pipe Burner with 1 1/4" FNPT Venturi and Optional Control Valve Orifice (Needle Valve)

  • 32in Pipe Burner with Support Legs

    32" Pipe Burner with Optional Support Legs

  • 32in Pipe Burner with Optional Support Legs and Pilot Assembly
  • 32in Pipe Burner with Optional Support Legs and Pilot Assembly

T-PILOT Assembly for the pipe burner is available as an Option at additional charge

 

$299.95

 

 

PBMG125 - Pipe Burner with Grease Shield - (support LEGS are an option)

  PBMG125

PBMG125 - Straight Pipe Burner 1 1/4" ID in 32", 44", 56", or 68" lengths with a permanently welded 3" high grease shield.

  • We stock 32", 44", 56", and 68" pipe burners assemblies.(As measured from one end of the pipe to the opposite end of the pipe's threads.)
  • The pipe burners are 1.25"ID and 1.5"OD with a standard schedule 40 pipe wall thickness. These assemblies include a welded end cap at one end and a venturi at the other end.
  • For supporting the assembly we recommend a cradle out of a well supported length of angle iron. A cradle support will permit easy removal of the burner unit for cleaning, when necessary.
  • Our pipe burners have been engineered and tested to give a even, high heat blue flames across the length of the pipe and they easily light.
  • The first 8" of the pipe is used as the "throat" of the burner and does not have any holes for flames. This space is required for the air and gas to mix efficiently in order to have a nice blue flame. Don't waste propane using a pipe burner that burns an inefficient yellow flame.

●   PBM125-32" has 24" of flame           12#                         14#
●   PBM125-44" has 36" of flame           16#                         18#
●   PBM125-56" has 48" of flame           20#                         22#
●   PBM125-68" has 60" of flame           24#                         26#

If you would like TejasSmokers.com to weld permanent 1/2" diameter round legs to support your pipe burner, then order the unit with "LEGS" at the end of the part number, as shown in the optional drop down box at right.
                          Free shipping within the 48 contiguous U.S. States.


                         32" Pipe Burner with Grease Shield and Optional Support Leg

                                              
                                      Pipe Burner with Optional T-PILOT Assembly

 

$349.95

 

 

  A75AM - 3/4" Cast Aluminum Venturi Air Gas Mixer, with an air shutter, Insect Screen Guard, and the selected orifice fitting. 

  A75AM

New Venturi Design

A75AM  3/4" Cast Aluminum Venturi Air Gas Mixer, air shutter, with Insect Screen Guard, and a 90° 3/8" gas flare orifice fitting (or selected orifice type).

-    Aluminum Casting Made in Houston, Texas. Made-in-U.S.A.


-  It has a 3/4" Female Normal Pipe Thread Outlet.

-  Light Weight, No Paint Needed and No Rust.

- To be used with High Pressure / Low Pressure Propane or
   Natural Gas.


- The flat top surface is 3" in diameter by 1-3/4" in height.

- The height of the venturi with an orifice is approximately 2-3/4".


- Includes an Aluminum Air Shutter, Insect Screen Guard and a 
  90 3/8" Flare Orifice, with #61 Orifice for High Pressure Propane.

Alternatively, a 180 3/8" Flare Orifice fitting is also available.
- Drilled to custom orifice size depending on your specified fuel and 
  length of pipe burner or specified burner at No Extra Charge.

(For alternative orifice or custom drilled orifice please let us know the
  information in comment box section when added to shopping cart).

 


Weight 7 oz. Free shipping within the 48 contiguous U.S. States.

3/4
3/4" Female NPT outlet threads.


The photos below show the different Options which can be choosen from the drop-down menu above the price.

OPTIONS:


A75AM - 3/4
A75AM with 90° Orifice, $99.95 


A75AM with CVO Valve Orifice, $139.95

     
  
A75AM with T-PILOT Assembly, $179.95  






 

$99.95

 

 

LPCAST6-2 - Low Pressure Propane or Natural Gas 2-Part Burner, 6" x 6" Sqaure Burner Head with Adjustable Lenght Neck

  LPCAST6-2

NEW BURNER /
NEW DESIGN



LPCAST6-2 - Low Pressure Propane or Natural Gas Two-Part Burner


Perfect for Smoker Pits and Smoke Houses.



- Made in Houston, Texas. Made-in-U.S.A.


40,000 BTU/hr Output

- 6" x 6" Burner Head


- Aluminum Casting Air and Gas Mixer Venturi



- Set Up for Low Pressure Propane Or Natural Gas

- Two-Part Burner, Pipe Nipple NOT Included



- NEW Design from our our LPCAST-2 Burner

( Similar to our old LPCAST-2 Burner but a better Upgrade)

- LPCAST-2 Video Reference


     
                                                      Top View of Burner Head 

      
Bottom View of Burner Head                                   Side View of Burner Head         

     
                                                     3/4" Female NPT Threads 


LPCAST6-2 Burner OPTIONS: 

       
LPCAST6-2 with 90 Degree Orifice, $ 259.95


      
LPCAST6-2 with CVO Needle Control Valve Orifice, $ 299.95


      
LPCAST6-2 with T-Pilot Assembly, $ 339.95

 

$259.95

 

 

HPCAST6 - High Pressure Cast Iron Propane Burner with 6 inch Neck

  HPCAST6

HPCAST6 - High Pressure Cast Iron Propane Burner with a 6" Neck.

  • Produces up to 160,000 BTU/hr in an evenly-directed manner.
  • Includes an air shutter, Insect Screen Guard and a 90° 3/8" flare Orifice. Alternatively, a 180° 3/8" flare orifice fitting is also available.
  • Best working distance is 3" to 4" from top of cast to bottom of pot.
  • The center bolt is a 6mm in diameter or a 1/4".
  • From the center bolt to the air inlet at the edge of the burner is 6 1/2"
  • From the center bolt to the end of the orifice is approximately 7 1/2"
  • Total length of the burner with an orifice is approximately 10".
  • Burner head diameter is 4", height from base to top of burner is 3"

Weight 3# 8 oz. Free shipping within the 48 contiguous U.S. States.


  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck
  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck

HPCAST6 with Optional Control Valve Orifice

  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck
  • 160,000 BTU/hr High Pressure Cast Iron Burner with 4in Neck

Bottom side view of the HPCAST6

  • 160,000 BTU/hr High Pressure Cast Iron Burner with Pilot Assembly
  • 160,000 BTU/hr High Pressure Cast Iron Burner with Pilot Assembly

HPCAST6 with Optional T-PILOT Assembly for the burner


 

$59.95

 

 

CS1 - Single Burner Cooker Stand For Outdoor Cooking such as Fish Frying, Camping, and Picnics

  CS1

CS1 - CS1 Single Burner Cooker Stand. Choice of High Pressure, Low Pressure, or Natural Gas. With (4) Leg Extensions. For Outdoor Cooking such as Fish Frying, Camping, and Picnics


Designed for use with high pressure propane (160,000 btu/hr). Low pressure propane or natural gas versions at 40,000 btu/hr are available by request, no extra charge. Perfect for folks who own RV's and want to take their outdoor cooking appliances on the road. The CS1 series cooker stands have removable legs which not only will provide for dual cooking heights of 15" or 30", but also makes the unit easy to store in an RV. This unit features a large 15.5" x 15.5" cook top with eight spokes and a high output 160,000 btu high pressure cast burner. The optional WING side table extensions work well with this unit. An optional 8" high, WG1 single burner folding WIND GUARD is available.


We recommend purchase of a COM1 preset regulator for a high pressure burner and a COM5 preset regulator for use if a low pressure cast burner is desired. We can supply optional gas hoses in any length. The CS1 series cooker stands come standard with a Needle Valve Control. 15.5"W x 15.5"D x 15"H or with legs installed 15.5"W x 15.5"D x 30"H.


Wt. 27#. Free shipping within the 48 contiguous U.S. States.


  • Single Burner Cooker Stand

    CS1H shown without the (4) Leg
    Extensions Which Are Included

 

$450.00

 

 

CS1-COM - Single Burner Portable Outdoor Camping Cooker Stand COMBO For Outdoor Cooking, Camping, Wok Cooking, and Picnics

  CS1-COM

CS1-COM -Single Burner Portable Outdoor Camping Cooker Stand COMBO, includes (2) WINGS, (1) Wind Guard, and Regulator Assembly. Choice of High Pressure, Low Pressure, or Natural Gas. For Outdoor Cooking, Wok Cooking, Camping, and Picnics


COMBO includes: CS1 series Single-Burner burner dual-height Cooker Stand, (2) WING Side Table Extensions, 8" high WG1 folding Wind Guard, propane regulator assembly with a 5 ft hose and Needle Control Valve at the burner. All you need is the propane tank. Natural gas version comes with a 60" natural gas hose and inline Needle Control Valve.


Wt. 46#. Free shipping within the 48 contiguous U.S. States.


  • Single Burner Cooker Stand with Wing Guard, (2) Wings and Regulator

    The CS1H-COM Base Unit Can Be Used As a Cooker Stand and
    Placed either on the Ground or on an Elevated Fireproof Surface

_________________________________________________________________

CS1-COM High Pressure with Optional Extra Accessories Wok Ring and T-PILOT

        

        

        

        

 

$800.00

 

 

HP1-COM - Single Burner Outdoor Hot Plate Cooker COMBO

  HP1-COM

HP1-COM - Single Burner Outdoor Hot Plate Cooker COMBO: Propane regulator w/ 5' hose, WG1 wind guard, CVO125 needle control valve.


♦  HP1H-COM will include, (1) 160,000 Btu's Burner,
(1) Wind Guard and  COM1 High Pressure Preset Regulator with 5ft hose.


♦  HP1L-COM will include, (1) 40,000 Btu's Burner,
(1) Wind Guard and COM5 low pressure preset regulator with 5' hose.
 

♦  HP1N-COM will include,  (1) 40,000 Btu's Burner,
(1) Wind Guard and a 5' natural gas hose.


Optional WING side table extensions and Small GRIDDLE options are below.


Wt. 33#. Free shipping within the 48 contiguous U.S. States.


  • Single Burner Hot Plate with Wind Guard and Preset High Pressure Regulator

    HP1H-COM Hot Plate Cooker with 160,000 btu/hr High Pressure Propane

              


                       
     HP1H-COM showing the Low, Medium and High Flames it could put out. 

 

$550.00