Home  >  Search Result >

Customer Reviews / Testimonials

 

Home  >  Search Result > Products

 

 

COM5 - Low Pressure PRESET Propane Regulator

  COM5

COM5 - Low Pressure PRESET propane regulator (6 oz, 11" WC), POL tank fitting, and a 3/8" ID UL approved AGA hose with 3/8" F SAE gas flare swivel connection.


160,000 btu/hr maximum output.


►   Green Acme wrench-less safety tank connector is available as an Option             at an additional charge.


Wt. 1#. Free shipping within the 48 contiguous U.S. States.

 

$49.95

 

 

COM5-UL - Low Pressure PRESET Regulator with UL Approved Ball Valve

  COM5-UL

COM5-UL - Low Pressure PRESET regulator (which reduces the tank pressure to (6 oz, 11" WC), POL tank fitting, UL approved ball valve for positive shut off, and a 3/8" ID UL approved AGA hose with 3/8" F SAE gas flare swivel connection.


160,000 btu/hr maximum output.


►   Green Acme wrench-less safety tank connector is available as an Option             at an additional charge.
 

Wt. 2#. Free shipping to the 48 contiguous U.S. States.

 

$69.95

 

 

COM5-GRN  - Low Pressure, High Output, PRESET Regulator, with Green Acme Tank Fitting

  COM5-GRN

COM5-GRN  -  Low Pressure, high output PRESET regulator
(6 oz, 11" WC) with a GREEN Acme tank safety fitting, and a
3/8" ID UL approved AGA hose with 3/8" F SAE gas flare swivel end. Other hose lengths available 10ft, 15ft, 20ft and in Stainless Steel overbraid.

■   160,000 btu/hr maximum output, for low pressure applications
     requiring higher gas volume output. 
■   The Green Acme is a wrench-less, right hand tank connector
     with excess flow prevention and a thermally sensitive sleeve.

Wt. 1#.  Free shipping to the 48 contiguous U.S. States.

 

$59.95

 

 

COM5-GRN-UL - Low Pressure, High Output, PRESET Regulator with GREEN Acme Tank Safety Fitting

  COM5-GRN-UL

COM5-GRN UL - Low Pressure, high output PRESET regulator (6 oz, 11" WC), GREEN Acme Type I tank safety fitting, UL approved ball valve for positive shut off, and a 3/8" ID UL approved AGA hose with 3/8" F SAE gas flare swivel connection.


■    160,000 btu/hr maximum output, regulator and hose designed for low
       pressure applications requiring higher gas volume output.

■    UL-approved ball valve for positive shut-off.

■    The Green Acme safety fitting enables wrenchless tank connections by               hand tightening only.


Wt. 2#. Free shipping to the 48 contiguous U.S. States.

 

$79.95

 

 

COM5-D  Low Pressure PRESET Regulator Dual Hose Combo

  COM5-D

COM5-D - Low Pressure PRESET regulator (6 oz, 11 " WC), two ball valves for control of gas through each hose, POL tank fitting and two 3/8" ID UL approved AGA hoses, each with 3/8" F SAE gas flare swivel connections.


►    160,000 btu/hr maximum output.


►    The Green Acme wrench-less safety tank connector is available as an                  Option at an additional charge.


Wt. 3#. Free shipping within the 48 contiguous U.S. States

 

$129.95

 

 

COM5-D-GRN - Low Pressure PRESET Regulator Dual Hose Combo,with Green Acme Tank Safety Fitting

  COM5-D-GRN

COM5-D- GRN - Low Pressure PRESET regulator (6 oz, 11 " WC), two ball valves for control of gas through each hose, POL tank fitting and two 3/8" ID UL approved AGA hoses, each with 3/8" F SAE gas flare swivel connections, with a Green Acme tank safety fitting.


►    160,000 btu/hr maximum output.


Wt. 3#. Free shipping within the 48 contiguous U.S. States.

 

$139.95

 

 

CS3CART - Three burner outdoor mobile camping stove cooking cart gas cooker, ideal for frying fish 

  CS3CART


CS3CART - Three burner outdoor garden, patio, mobile camping stove cooking cart gas cooker, ideal for frying fish or using a griddle

Models for High Pressure, Low Pressure, or Natural Gas.


A self-contained and very sturdy mobile camp stove cart assembly consisting of three propane cast iron burners with individual needle valve controls on an all brass modular gas manifold. Cart has 8" rubber tires and 3 1/2" swivel casters. Burner top may be lifted up from the Mobile Propane Camp Stove Burner Cart to become a 9" tall outdoor tabletop, camping cooking unit.  We can customize any cart with any combination of high and low pressure burners in any position. Call us.


►   CS3CART-H with (3) HPCAST6 160,000 btu/hr high pressure (silver) burners


►   CS3CART-L with (3) LPCAST-L 40,000 btu/hr low pressure (black) burners


►   CS3CART-N with (3) LPCAST-N 40,000 btu/hr natural gas (black) burners


♦   Optional WING Side Table Extensions may be used at the left end or front or back of this cart.


 ♦  An optional WG3 wind guard is also available.


Far right the mobile camp stove cart for low pressure propane (Optional COM5 low pressure regulator is recommended). Shown below for high pressure propane (optional COM1 preset high pressure regulator is recommended). The Cart can also be ordered in natural gas.  Dims: 42"L x14"D (at top cooking surface) , 22"D (at bottom including rubber tires) x 36"H. These units are built to last. They are nothing like what is offered at the Depots or Discounters. Look at the weights.


Wt. 100#. 

Free shipping to the 48 contiguous U.S. States.


  • Triple Burner Cart Stove

    CS3CART Customized with both
    High and Low Pressure Burners


 

$1500.00

 

 

PBM125 - Pipe Burner - support LEGS are an option

  PBM125

PBM125 - Straight Pipe Burner 1 1/4" ID - 32", 44", 56", or 68" lengths.

  • We stock 32", 44", 56", and 68" pipe burner assemblies, also called stick burners or tube burners, (as measured from one end of the pipe to the opposite end of the pipe's threads.)
  • The pipe burners are 1.25"ID and 1.5"OD with a standard schedule 40 pipe wall thickness. These assemblies include a welded end cap at one end and a venturi at the other end.
  • For supporting the assembly we recommend a cradle out of a well supported length of angle iron. A cradle support will permit easy removal of the burner unit for cleaning, when necessary.
  • Our pipe burners have been engineered and tested to give a even, high heat blue flame across the length of the pipe and they easily light.
  • The first 8" of the pipe is used as the "throat" of the burner and does not have any holes for flames. This space is required for the air and gas to mix efficiently in order to have a nice blue flame. Don't waste propane using a pipe burner that burns an inefficient yellow flame.

●   PBM125-32" has 24" of flame         8#                  10#
●   PBM125-44" has 36" of flame       10#                  12#
●   PBM125-56" has 48" of flame       12#                  15#
●   PBM125-68" has 60" of flame       15#                  18#

If you would like  TejasSmokers.com  to weld permanent 1/2" diameter round support legs along the length of your pipe burner then order the unit with "LEGS" at the end of the part number, as shown in the drop down box at right.

We can custom fabricate stainless steel pipe burners in any length on our milling machine.  Call for a quote.

 Free shipping within the 48 contiguous U.S. States.

 

  • 68" Pipe Burner with 1 1/4" FNPT Venturi and Optional Control Valve Orifice (Needle Valve)

  • 32in Pipe Burner with Support Legs

    32" Pipe Burner with Optional Support Legs

  • 32in Pipe Burner with Optional Support Legs and Pilot Assembly
  • 32in Pipe Burner with Optional Support Legs and Pilot Assembly

T-PILOT Assembly for the pipe burner is available as an Option at additional charge

 

$299.95

 

 

PBMG125 - Pipe Burner with Grease Shield - (support LEGS are an option)

  PBMG125

PBMG125 - Straight Pipe Burner 1 1/4" ID in 32", 44", 56", or 68" lengths with a permanently welded 3" high grease shield.

  • We stock 32", 44", 56", and 68" pipe burners assemblies.(As measured from one end of the pipe to the opposite end of the pipe's threads.)
  • The pipe burners are 1.25"ID and 1.5"OD with a standard schedule 40 pipe wall thickness. These assemblies include a welded end cap at one end and a venturi at the other end.
  • For supporting the assembly we recommend a cradle out of a well supported length of angle iron. A cradle support will permit easy removal of the burner unit for cleaning, when necessary.
  • Our pipe burners have been engineered and tested to give a even, high heat blue flames across the length of the pipe and they easily light.
  • The first 8" of the pipe is used as the "throat" of the burner and does not have any holes for flames. This space is required for the air and gas to mix efficiently in order to have a nice blue flame. Don't waste propane using a pipe burner that burns an inefficient yellow flame.

●   PBM125-32" has 24" of flame           12#                         14#
●   PBM125-44" has 36" of flame           16#                         18#
●   PBM125-56" has 48" of flame           20#                         22#
●   PBM125-68" has 60" of flame           24#                         26#

If you would like TejasSmokers.com to weld permanent 1/2" diameter round legs to support your pipe burner, then order the unit with "LEGS" at the end of the part number, as shown in the optional drop down box at right.
                          Free shipping within the 48 contiguous U.S. States.


                         32" Pipe Burner with Grease Shield and Optional Support Leg

                                              
                                      Pipe Burner with Optional T-PILOT Assembly

 

$349.95

 

 

  A75AM - 3/4" Cast Aluminum Venturi Air Gas Mixer, with an air shutter, Insect Screen Guard, and the selected orifice fitting. 

  A75AM

New Venturi Design

A75AM  3/4" Cast Aluminum Venturi Air Gas Mixer, air shutter, with Insect Screen Guard, and a 90° 3/8" gas flare orifice fitting (or selected orifice type).

-    Aluminum Casting Made in Houston, Texas. Made-in-U.S.A.


-  It has a 3/4" Female Normal Pipe Thread Outlet.

-  Light Weight, No Paint Needed and No Rust.

- To be used with High Pressure / Low Pressure Propane or
   Natural Gas.

- The flat top surface is 3" in diameter by 1-3/4" in height.

- The height of the venturi with an orifice is approximately 2-3/4".


- Includes an Aluminum Air Shutter, Insect Screen Guard and a 
  90 3/8" Flare Orifice, with #61 Orifice for High Pressure Propane.

- Alternatively, a 180 3/8" Flare Orifice fitting is also available.
- Drilled to custom orifice size depending on your specified fuel and 
  length of pipe burner or specified burner at No Extra Charge.

(For alternative orifice or custom drilled orifice please let us know the
  information in comment box section when added to shopping cart).
 


Weight 7 oz. Free shipping within the 48 contiguous U.S. States.

3/4
3/4" Female NPT outlet threads.

The photos below show the different Options which can be choosen from the drop-down menu above the price.

OPTIONS:

A75AM - 3/4
A75AM with 90° Orifice, $99.95 


A75AM with CVO Valve Orifice, $139.95

       
A75AM with T-PILOT Assembly, $179.95  






 

$99.95